MicrIO XH300AS Cross-Hair Generator with Relay

The XH300AS is the most versatile, easy to use, and cost effective video cross-hair generator available on the market.    The XH300AS cross-hair generator is capable of superimposing a video cursor image on an existing video stream.   The XH300AS-*-R adds the ability to control a relay.

The incoming video is fed into the connector labeled “Video In”.    The video input must be standard base band NTSC or PAL format.    The resulting output video is available at the connector labeled “Video Out”.    The output video is in exactly the same form as the incoming video except for the superimposed video generated by the XH300AS.

The XH300AS supports two different cursor types: single cross-hair and double cross-hair.    The crosshairs are used to specify where the video is sampled for relay control.   While adjusting the cursors the settings are displayed the bottom of the screen.   The trip points where the relay will be activated are adjustable.   When the adjustment is complete the settings are saved in non-volatile memory.    The setting will be restored when power is applied.

Specifications:

• Video standards supported:     NTSC, PAL.
• Power requirements:    8 to 15 Volts, 80 mA
• Input/output Impedance:    75 Ohms
• Cursor types:    Cross-hair and double cross-hair.
• Control:    Rotary encoder with press switch
• AC Relay:   240 Volts at 1 Amp.
• DC Relay:   48 Volts at 0.4 Amps.
• Video connectors:    BNC, or S-Video jacks.
• Power connector:    2.1 mm DIN, center pin positive
• ROHS:    Lead free
• CE compliant.

Full Specification (PDF).

Payment is processed by PayPal.  

PayPal account: sales@micrio.com